This command is a boolean command. See
Section 6.1
for more information on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will
be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description
Status Message
T01AHLD1
Enable loop drop based auto hangup mode.
T01AHLD1
T01AHLD0
Disable loop drop based auto hangup mode.
T01AHLD0
T01AHLD2
Toggle loop drop based auto hangup mode.
T01AHLDx
, where
x
is
0
or
1
depending on
the current state of the loop drop based auto
hangup mode.
T01AHLD?
Query auto hangup mode.
T01AHLDx
, where
x
is
0
or
1
depending on
the current state of the loop drop based auto
hangup mode.
8.9.
AMNOMAT
-- Select NOM Attenuation on Each Output
This command enables, disables, or queries NOM attenuation for the specified output . (A, B, T). NOM
attenuation is calculated as 10*log(Number of Open Microphones).
Remember that even though there are no microphones on this device, other microphones can be
brought in via the W, X, Y, and Z busses. These signals will have NOM information carried with them
from the other devices, which is why NOM attenuation is provided at the outputs.
This command is a channel boolean command. See
Section 6.3
and
Section 6.1
for more information on
this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will
be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example
Description
Status Message
T01AMNOMATA1
Enable NOM attenuation on
output A.
T01AMNOMATA1
T01AMNOMATA0
Disable NOM attenuation on
output A.
T01AMNOMATA0
T01AMNOMATB2
Toggle NOM attenuation status on
output B.
T01AMNOMATBx
, where
x
is either
0
or
1
depending on the current mute status of NOM
attenuation on the ouptut.
T01AMNOMATB?
Query NOM attenuation status of
output B.
T01AMNOMATBx
, where
x
is either
0
or
1
depending on the current NOM attenuation
status of the output.
T01AMNOMAT*1
Enable NOM attenuation on all
outputs (A, B).
T01AMNOMAT*11
T01AMNOMAT*0
Disable NOM attenuation on all
outputs (A, B).
T01AMNOMAT*00