Polycom Vortex EF2201 Command List Download

Page: 36 / 85

respectively.

This command is saved to non-volatile memory only as part of a preset. The state of this command will

be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.

Example

Description Status Message

T01GAINIT10

Set gain on

input T to 10

dB.

T01GAINIT10

T01GAINIT?

Query the

gain on input

T .

F01GAINI2xB01GAINITxS01GAINIAxQ01GAINIAxT01GAINITx

where

is a number between 0 and 30, depending on the current

setting of the gain on input channel T .

T01GAINI*6

Set gain on

all inputs (T)

to 6 dB.

T01GAINI*è

T01GAINI*?

Query gain

on all inputs

(T).

T01GAINI*x

, where

is between

and

, depending on the current

setting of the gain for the input channel.

8.33.

GAINO

-- Set Output Gain

This command sets or queries the gain (in dB) of the output channels (only T on the EF2201).

This command is a channel integer command. See

Section 6.3

and

Section 6.2

for more information on

this type of command. The minimum and maximum values for this command are -100 and 20,

respectively.

This command is saved to non-volatile memory only as part of a preset. The state of this command will

be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.

Example

Description

Status Message

T01GAINOT10

Set gain on output channel T to 10 dB.

T01GAINOT10

T01GAINOT?

Query the gain on output channel T.

, ,

T01GAINOTx

where

is a number

between -100 and 20, depending on the

current setting of the gain on output channel

T01GAINO*6

Set the gain on all output channels

(only T on the EF2201) to 6 dB.

T01GAINO*è

T01GAINO*?

Query gain settings on all output

channels (only T on the EF2201).

T01GAINO*x

, where

is between

<space>

and

, depending on the current setting of

the gains for each of the output channel T.

8.34.

GAINP

-- Set Phone Output Gain

Summary of Contents for Vortex EF2201






















































































Search results

Summary of Contents for Vortex EF2201

Reviews:

Related manuals for Vortex EF2201

Brands by name

Popular brands

Polycom Vortex EF2201, Command List

Search results

Summary of Contents for Vortex EF2201

Reviews:

Related manuals for Vortex EF2201

Brands by name

Popular brands