Polycom Vortex EF2201 Command List Download

Page: 81 / 85

T01SGTYPE?

Query current signal generator type.

T01SGTYPEx

, where

is either

depending on whether the signal generator

is currently configured to generate white or

pink noise, respectively.

8.105.

SOUNDL

-- Play Sound Locally

This command can be used to play sounds from the telephone interface to serve as audio cues. The

SOUNDP

command plays sounds out to the phone output. The

SOUNDL

command plays sounds through

the input from the telephone interface (so they will be heard locally). The same sound generator is also

used for playing entry and exit tones for the auto answer and auto hangup features.

This command takes a single argument that indicates the sound to be played. The following table lists

the sound numbers and a description of the generated sound.

Sound Number

Sound Description

ascending thirds

descending thirds

ascending chorus

descending chorus

ascending doorbell

descending doorbell

quick double buzz

long single buzz

The

SOUNDL

and

SOUNDP

were originally implemented to allow users to implement custom passcode

systems that require users calling in via phone to enter a passcode before entering the conference. The

sound commands could be used to provide feedback to the caller as well as the conference.

Example

Description

Status Message

T01SOUNDL0

Play "ascending thirds" sound (same as entry tone) locally.

T01SOUNDL0

8.106.

SOUNDP

-- Play Sound to Phone

This command can be used to play sounds from the telephone interface to serve as audio cues. The

SOUNDP

command plays sounds out to the phone output. The

SOUNDL

command plays sounds through

the input from the telephone interface (so they will be heard locally). The same sound generator is also

used for playing entry and exit tones for the auto answer and auto hangup features.

This command takes a single argument that indicates the sound to be played. The following table lists

the sound numbers and a description of the generated sound.

Sound Number

Sound Description

Summary of Contents for Vortex EF2201






















































































Search results

Summary of Contents for Vortex EF2201

Reviews:

Related manuals for Vortex EF2201

Brands by name

Popular brands

Polycom Vortex EF2201, Command List

Search results

Summary of Contents for Vortex EF2201

Reviews:

Related manuals for Vortex EF2201

Brands by name

Popular brands