Polycom ViewStation H.323, User Manual

Page: 71 / 106

© Polycom, Inc. 61 ViewStation H.323 User’s Guide
10
System Diagnostics
You can locate information about and administer the ViewStation H.323 by
selecting
System Info> Admin Setup from the main calling screen.
ViewStation H.323 Diagnostics
To run diagnostics from your PC, see the Remote Management section for
details. To run diagnostics from the ViewStation H.323, go to System
Info>Diagnostics . From the Diagnostics screen, you can check the status
of the network, rate of the video signal, status of an existing video call,
color contrast on the monitor, sound coming from the ViewStation H.323,
near-end loop, and far-end loop. You can also reset the system.
4. Highlight the appropriate icons to find out the details about a specific
function of your ViewStation H.323.
5. To return to the Diagnostics screen, use the arrow buttons on the
remote to highlight the Menu icon. Then, press the SELECT button.
6. To return to the main calling screen at any time, press the
CALL•HANG-UP button on the remote.
Tip
To run diagnostics during a video call, press the MENU button on the remote. The
main calling screen is displayed. When you are finished diagnosing the system, press the