Polycom SpectraLink 8440, User Manual

Page: 61 / 116

Push-to-Talk (PTT) and Paging
April, 2011 | 1725-36720-001_RevB 51
Paging Group Subscriptions
In order to receive a page from a particular group, you must subscribe to that group. By default, you are
subscribed to groups 1, 24, and 25. Contact your system administrator for information about who is in
each group.
Change the group subscriptions:
By default, you are subscribed to paging groups 1, 24, and 25. You can change which groups you are
subscribed to, as can your system administrator. You cannot disable your subscriptions to groups 24 and
25.
1 Navigate to Settings > User Settings > Preferences > Paging/PTT Configuration > Paging .
2 Scroll down to Subscribe to Groups , and then press OK .
3 Scroll to the group you want to subscribe to.
4 Press OK .
5 Select Yes.
6 Press the Back key and confirm the changes.
Allow/disallow pages to play during active calls:
By default, if you are in active call when a page is received, the page will be held until you end the active
call (an Emergency page is heard immediately). You can change the configuration to accept pages while
you are in an active call and have the page audible during the call.
1 Navigate to Settings > User Settings > Preferences > Paging/PTT Configuration > Paging .
2 Scroll down to Accept while Busy , and then press OK .
3 Highlight the option you want ( Yes or No ) and press OK .
4 Press the Save soft key to save the change.
Adjust the volume of non-Emergency group pages:
•
Use the side buttons to adjust the volume during a non-Emergency group page.
You cannot adjust the volume of Emergency group pages using the handset volume
control buttons. Setting the Emergency page volume is an administrator function. By
default, Emergency pages are played at a very high volume level.