Polycom SpectraLink 8440 User Manual Download Page 19

Page: 19 / 116

Before Using Your Handset

April, 2011 | 1725-36720-001_RevB

Select

Manage BT Headsets.

A combined list of up to five connected, paired, and detected

headsets displays. Your list might already be populated or it might be empty. Icon color indicates
status:

•

Red icon

Indicates the listed headset is not paired

•

White icon

Indicates that the headset is paired

•

White icon with a headset

Indicates that the headset is paired and connected

Press the

Add Device

soft key to begin the acquire procedure. Give this list at least ten seconds to

populate to allow the handset enough time to detect new devices. All nearby devices in discovery
mode will be added. Once the device is paired, it will display on the list.

Now you are ready to connect the device. Press the

Connect Device

soft key. The Bluetooth

headset model will display on the list with the headset icon. The headset icon will also display in
the status bar.

Summary of Contents for SpectraLink 8440





















































































































Search results

Summary of Contents for SpectraLink 8440

Reviews:

Brands by name

Popular brands

Polycom SpectraLink 8440, User Manual

Search results

Summary of Contents for SpectraLink 8440

Reviews:

Brands by name

Popular brands