Preparing Your Room for the Polycom Open Telepresence Experience (OTX) 300 Installation
Page 11 of 32
For all regions:
You must refer to the following table and determine which voltage, outlet type, and image correspond
to your country:
Camera Bracket
During the installation of the OTX 300, the installers must attach the camera bracket to the front wall
of the room. To prepare for the installation of this bracket, you must drill mounting holes in the front
wall in accordance with the placement plan on page 30. Ensure that you use the recommended
hardware for your type of wall.
Obstructions
The OTX video wall is often installed close to the front wall of the room. As a result, you may find it
difficult to reach or see any thermostats, fire strobes, fire alarms, light switches, or other devices
located on that wall. Therefore, if any of these devices are present on the front wall of the room, you
should move them to a side wall. Fire strobes and alarms should never be blocked from view by the
OTX 300.
