Polycom KIRK KWS6000, Installation And Configuration Manual

Page: 136 / 206

KIRK Wireless Server 6000 Installation and Configuration Guide
13–10
This section provides information about:
•
“Creating Login (Subscribing Handset)” on page 13-10
•
“Subscribing a Handset to Different Systems” on page 13-11
Before subscribing handsets you need to ensure:
• that handset battery has been charged ( “Charging Battery” on page 8-9).
Low battery could cause subscription problems.
• that the handsets have been registered to the system ( “Registering KIRK
Handsets” on page 13-1).
Creating Login (Subscribing Handset)
To create a login, the system must allow subscriptions to be made. Some
systems also require an Authentication Code (AC). If more than one system
currently permits subscription, you will need to know the ID of the system to
which you want to subscribe. Authentication Codes and system ID’s will be
provided be the system administrator.
You can subscribe up to 10 systems (create 10 logins).
1
Press Menu to enter main menu.
2
Scroll to Settings and press Select .
3
Scroll to Advanced and press Select .
4
Scroll to Login and press Select .
5
Scroll to Create login and press Select . The handset will start searching
for a system.
6
Scroll to the found system and press Select .
7
Enter an AC Code and press Ok to connect to the system.
8
Press Ok .
Note Subscription of handsets requires the use of each registered handset.
Note To make subscriptions, the system must allow subscriptions to be made
(refer to
“Wireless Server Configuration” on page 10-9). Some systems
also require an Authentication Code (AC). If more than one system
currently permits subscription, you will need to know the ID of the system
(ARI code) to which you wish to subscribe. Authentication Codes and
system ID’s (ARI codes) will be provided by the system administrator.