Polycom KIRK KWS6000, Installation And Configuration Manual

Page: 129 / 206

KIRK Handset Registration and Subscription
13–3
For more general information about the IPEI number (serial number) and
how to retrieve it, refer to
“Retrieving the Serial Number of the KIRK
Handset” on page 8-12.
4
In the Access code field, type the authentication code (AC) (optional)
The authentication code is a subscription password of a maximum of eigth
digits, defined by the technicians, and can be used when connecting the
handset to a KWS6000. The authentication code is a subscription pin code
for the individual handset.
5
In the Standby text field, type a text to be displayed when the handset is
on hook (optional).
6
In the Username field, type the user part of a SIP URI, e.g. 1234 in John
Doe<sip: 1234 @somecompany.com>.
7
In the Domain field, type the domain part of a SIP URI, e.g.
somecompany.com in John Doe<sip:1234@ somecompany.com >
(optional).
Note: If not configured, the default domain will be used.
8
In the Displayname field, type the name to be displayed (caller ID), e.g.
John Doe in John Doe <sip:1234@somecompany.com> (optional).
9
In the Authentication user field, type a user name (optional).
10
The user name will override the Default User field under SIP
Configuration (refer to “SIP Configuration” on page 10-10).
11
In the Authentication password field, type a password (optional).
The password will override the Default Password field under SIP
Configuration (refer to “SIP Configuration” on page 10-10).
12
In the Local number field, type the local number of the handset
(optional).
Typing a local number makes it possible to send an MSF to the subscribed
handset.
13
Click Save to save the registration(s).
Subscribing KIRK Handsets
KIRK 3040-Handset
A handset can be subscribed to more systems and will automatically log on to
the relevant system. If a handset is subscribed to two or more systems, you can
use Auto Login type A to change between the systems automatically.
When to use Auto Login type A: