Polycom HDX 9004, Administrator'S Manual

Page: 91 / 194

7 - 1
7
System Location, Appearance, and
Tones
Setting Date, Time, and Location
You can update the system with regional settings, including the
location-specific language and calling parameters.
To set the date, time, and location:
1.
Go to System > Admin Settings > General Settings > Location .
2.
Configure these settings on the Location screen:
Setting Description
Country Specifies the country where the system is located.
Changing the country automatically adjusts the country code
associated with your system.
Language Sets the language for the user interface.
International
Dialing Prefix Specifies the international code required for placing ISDN
calls from the system location to another country.
Country Code Specifies the country code for the system location.
Area Code Specifies the area code to use for analog phone calls.
Always Dial Area
Code Specifies if an area code is required to place ISDN calls in
the specified country.
Dial 1+ for all USA
Calls Specifies that calls to systems in the United States must
include a “1” before the area code.
Note: Even if you have this setting enabled, you may need
to dial 1 and the area code when calling long distance over
ISDN within your same area code.