POLTI Vaporetto MV 20.20, Instruction Manual

Page: 44 / 120

14. TROUBLESHOOTING – TIPS
PROBLEM CAUSE SOLUTION
The appliance does not start. No power. Check that the vacuum cleaner
is connected to the mains elec-
tricity.
Suction power is decreased. Nozzle, suction hose or
suction tube are blocked.
Turn the appliance off and un-
plug it. Clean the filter and re-
move any blockages of tubes
and accessories.
Water leakage when vacuum-
ing liquids.
Blocked float. Clean the water filter assembly.
The extension tubes or the ac-
cessories are loose.
The locknut is in the OPEN
position.
Turn the locknut to the
CLOSED position.
The appliance will not dis-
pense steam.
Boiler switched off.
Boiler out of water.
Steam lock activated.
The boiler is not yet pres-
surised.
Monoblock plug not insert-
ed correctly.
Press the boiler button.
Add water to the boiler.
Disconnect the steam lock on
the handle.
Wait until the steam lamp turns
off.
Insert the monoblock plug cor-
rectly.
Steam is dispensed mixed with
drops of water.
The steam hose and/or the
telescopic tube are cold.
Direct the steam jet onto a
cloth to heat up the tubes.
Loss of steam or drops of wa-
ter between the connection of
the accessories.
The seals are damaged.
Detergent function acti-
vated.
Replace the seals.
If not needed, deactivate the
detergent function.
Should the problems persist, contact an Authorised Polti Service Centre (see www.polti.com
for the up-to-date list) or Customer Services.
IT
A
L
IA
N
O
E
N
G
L
IS
H
| 44 |