manualshive.com logo in svg

Pololu Corporation Zumo 32U4, User Manual, Page: 4 / 76

Share
Download
Pololu Corporation Zumo 32U4 User Manual Download Page 4

Comparison with the Zumo robot kit for Arduino (with Zumo Shield)

Our older

Zumo robot for Arduino

[https://www.pololu.com/product/2510]

, built with a

Zumo Shield

[https://www.pololu.com/product/2508]

, is another Arduino-compatible robotic platform based on the Zumo chassis.

The Zumo Shield is designed for a board with a standard Arduino form factor, like an

Arduino Uno

[https://www.pololu.com/product/2191]

,

Arduino Leonardo

[https://www.pololu.com/product/2192]

, or

A-Star 32U4

Prime

[https://www.pololu.com/category/165/a-star-32u4-prime]

, to plug into it and act as its controller.

Assembled Zumo 32U4 robot.

Assembled Zumo robot for Arduino

with an Arduino Uno (with original

white sprockets).

By contrast, the Zumo 32U4 includes an on-board ATmega32U4 microcontroller (the same one used in the
Leonardo and A-Star 32U4 boards), combining the functions of the Zumo Shield and the separate Arduino
controller into a single board and enabling the resulting robot to be even more compact. However, it remains
just as easy to program as a standard Arduino, thanks to its USB interface and preloaded Arduino-compatible
bootloader. The Zumo 32U4 also adds many features that are not found on the Zumo Shield, including encoders,
an LCD, and proximity detection.

Some of the pin mappings and software libraries differ between the Zumo 32U4 and Zumo robot for Arduino,
so programs written for one robot generally need to be modified to work on the other.

1.1. Configurations and included components

The Zumo 32U4 robot is available in several configurations:

•

Zumo 32U4 Robot Kit (No Motors)

[https://www.pololu.com/product/3124]

– requires assembly and

soldering; can be customized with your choice of

motors

[https://www.pololu.com/category/60/micro-metal-

gearmotors]

(not included)

•

Zumo 32U4 Robot (assembled with 50:1 HP motors)

[https://www.pololu.com/product/3125]

•

Zumo 32U4 Robot (assembled with 75:1 HP motors)

[https://www.pololu.com/product/3126]

•

Zumo 32U4 Robot (assembled with 100:1 HP motors)

[https://www.pololu.com/product/3127]

Pololu Zumo 32U4 Robot User’s Guide

© 2001–2015 Pololu Corporation

1. Overview

Page 4 of 76

Summary of Contents for Zumo 32U4













































































Reviews:

No comments