HEATING MAIN MONTAGE INSTRUCTIONS CV4.04
Addition Nr 2
ISOCYANAT (Component B)
Entry from Safety information pages VI4.02
1. Chemical composition:
Difenilmet
ā
n – 4,4’ – diizocian
ā
ts, CAS Nr. 101-68-8
2. Influence characteristics:
R20 –
hazardous to inhale,
R36/37/38 –
irritates eyes, respiratory system and skin,
R42/43 –
when inhaled or come in contact with skin
can cause high sensitivity.
3. Work safety requirements:
Hand protection: moisture impervious gloves.
Eye protection: safety glasses.
Body protection: protective clothes, closed work clothes.
General safety and hygiene measures: store away from food and beverages, pet
food and drinks. It is forbidden to eat, drink or smoke at the work place. Before
breaks and after shift end clean hands and face.
4. First aid:
When inhaled: don’t allow for patient to worry or move, take him to fresh air. If
possible, perform artificial breathing with oxygen, perform medical aid.
Symptoms can occur after a period of time.
When came in contact with skin: immediately remove saturated with chemical
clothes, wash body with water and soap or polypropylene glycol (with Lupranol*
1000) or corn oil.
When came in contact with eyes: wash well with water, perform medical aid.
When swallowed: immediately rinse mouth and then drink a lot of milk and water,
don’t cause vomiting, call the doctor.
Note to the doctor: treat after visible symptoms, there is no known antidote.
5. Fire safety procedures:
Appropriate resources for putting out fire: dry nonflammable agent, foam, carbon
dioxide (CO
2
), spraying of water in big quantities.
For putting out flame: carbon monoxide (CO), carbon dioxide (CO
2
), nitric oxide,
hydrogen cyanide, izocyanate.
Special protection equipment: use isolated breathing device and protection clothes.
6. Additional information:
Safety information data page VI4.02.
X
n
Hazardous
