6
【
INSTALLATION
】
1.Remove the Integrated Host and the packaging of the door panels.
2.The main chassis display panel up, left and right side of the door as shown in the
figure, then connect the left and right door to the main box respectively with bolts and
nuts locked tightly
。
3.Make sure the door probe line on the left and right were tightly inserted into the
corresponding socket on the motherboard, pay attention to tighten, do not loose.
4.Raise the metal probe door to the vertical position and move to the specified
working position.
5.Make the power line in the door side of connected to the power supply into the
working state.
