8
Figure-1 Figure-2 Figure-2
【
OPERATION
】
6 Zone Walk Through Metal Detector
1. Long press “SELECT”3 seconds, entering“P-0”or ”P-1”mode. (“P-0” for
Inspection, “P-1” for Test Flying Object or Test Mode.) Adjust to “P-0” mode and
press “ENTER”to confirm entering P-0 mode.
2. Long press“SETUP” entering“Frenquency Adjustment”,will show “F-xx”.
“xx”means Device Frequency Code. Press “SELECT” can adjust the Frequency. Press
“ENTER” confirm the selection. In order to avoid signal interference, the frequency
code of each adjacent device must be different. (For user convenient operation, we
have particularly simplified the Frequencies to 16 total, which can for unlimited
devices installation!)
3. Press “SELECT”, will show “12345”, which is factory original password. If have
changed the original password, please input the new correct password. (For password
input details please refer to “Password Management”)
4. Press “ENTER” again, will show “00000”, means password correct can go to next
