SprintScan 35LE Service Manual
Disassembly
1 8
Removing AC Inverter
1. Turn off the power and disconnect the power cord.
2. Remove the upper housing.
3. Remove the screw securing the AC Inverter (Figure 2-14) to the bottom case.
4. Disconnect the four (4) cables connected to the scanning lamp. Lift out the AC
Inverter.
Note:
If applicable, remove the broken fuse and replace it with a new one.
The AC Inverter fuse is soldered on the AC Inverter PC board. In many
cases, problems may be solved by replacing.
5. When fuse replacement is completed, replace the AC Inverter on the bottom case
and tighten the screw securing it to the bottom case.
Figure 2-14. Removing AC inverter
