Polaris W Series, Installation And User Manual

Page: 18 / 196

17
3.4 I Using the app to control the cleaner
Before using the app to control the cleaner, check that:
• Connect the control box to a power outlet,
• Immerse the cleaner in the pool.
3.3.1 Programming and controlling cleaning cycles
From the applicati on:
• Start/stop cleaning;
• View the current cycle's remaining cleaning ti me (displayed in hours and minutes);
• Increase/Reduce the cleaning ti me by 15-minute sequences (depending on the model);
• Choose the pre-saved cleaning modes
• The new cleaning mode will take eff ect for the cleaning cycle in progress and all future cycles.
• The cleaning cycle ti me may vary depending on the selected setti ngs.
• Schedule cleaning cycles (days and hours) (depending on model); Cleaning cycles may be programmed to repeat,
only one program can be set per day;
• Check the pool's temperature during the cleaning cycle (depending on model);
The cleaner measures the water temperature while operati ng.
• When the cleaner is at the bott om of the pool, it is normal for there to be a temperature diff erence
between that measured by the cleaner and that measured by a thermometer placed at the pool's surface
or measured by another appliance.
3.3.2 "Lift System" functi on for helping to remove the cleaner from the water
• Only acti vate the Lift System functi on if the cleaner is in view.
• From the applicati on, press to use the Lift System functi on (see "2.5.1 Automati c "LIFT SYSTEM" mode").
• Press the arrows to rotate the cleaner left or right.
• When the cleaner is facing the right wall, press the butt on to bring the cleaner to the wall.
3.3.3 Remote control (depending on the model)
The cleaner can be controlled using your smartphone or tablet as a remote control.
• Use the remote control only if you have the cleaner within view.
• 2 modes are available for piloti ng the cleaner (depending on the equipment):
"Joysti ck mode": Press the icons to move the cleaner forwards and backwards and to turn left or right.
"Kineti c mode": Control the cleaner by ti lti ng the mobile device upwards (backwards movement), downwards
(forward movement), to the left (turn left ), to the right (turn right) .
• For localised cleaning, use the "Localised cleaning" functi on (depending on the model) : when this functi on is
acti vated, the cleaner cleans a 1m
2
area in front of it.
• If the cleaner is relati vely slow to respond to an acti on requested in the app, check the Wi-Fi network
signal, see "3.2 I First-ti me cleaner confi gurati on".