Polaris Sportsman 9921792 Owner'S Manual Download Page 95

Page: 95 / 131

MAINTENANCE

Breather Filter/Hose

The breather filter is on the hose between the engine and air box.

1. Remove the left side panel.

See page 87.

2. Remove the hose clamps from

the filter and pull the filter out of
the hoses.

3. Inspect the filter for debris. Blow

gently through the filter in the
direction of the arrow to check
for clogging. Replace a damaged
or clogged filter.

4. Check the hoses for cracks, deterioration, abrasion, or leaks.

Replace as needed.

5. Reinstall the filter and hose clamps.

NOTE:

The filter is effective with the arrow pointing in either direction.

Operation of your vehicle without a breather filter can cause engine damage.

Breather Filter

Summary of Contents for Sportsman 9921792




































































































































Search results

Summary of Contents for Sportsman 9921792

Reviews:

Related manuals for Sportsman 9921792

Brands by name

Popular brands

Polaris Sportsman 9921792, Owner'S Manual

Search results

Summary of Contents for Sportsman 9921792

Reviews:

Related manuals for Sportsman 9921792

Brands by name

Popular brands