Polaris Sportsman 9921792 Owner'S Manual Download

Page: 40 / 131

FEATURES AND CONTROLS

Instrument Cluster

Rider Information Center

Diagnostic Mode

Miles/Kilometers toggle

The display in the tripmeter and odometer can be changed to display
either standard or metric units of measurement.

1. Enter the diagnostic mode.

2. Toggle to the screen that displays either kilometers (KM) or miles

(MP).

3. Press and hold the mode button until the letters flash, then press and

release the button once. When the display stops flashing, the mode
has been set.

Downloading Codes

The EFI diagnostic mode is for informational purposes only. Please see
your Polaris dealer for all major repairs.

See page 40 for Blink Codes and Failure Descriptions. Use the follow-
ing procedure to download blink codes (failure codes) from the EFI
module.

1. Place the transmission in

PARK. Stop the engine.
Turn the key switch to the
ON position.

2. Turn the key switch off and

on three times in less than
five seconds. The word
“WAIt” will appear on the
screen.

Summary of Contents for Sportsman 9921792




































































































































Search results

Summary of Contents for Sportsman 9921792

Reviews:

Related manuals for Sportsman 9921792

Brands by name

Popular brands

Polaris Sportsman 9921792, Owner'S Manual

Search results

Summary of Contents for Sportsman 9921792

Reviews:

Related manuals for Sportsman 9921792

Brands by name

Popular brands