Polaris Sportsman 9921792 Owner'S Manual Download

Page: 104 / 131

102

MAINTENANCE

Spark Arrestor

Occasionally, the spark arrestor may accumulate carbon, which can
restrict the exhaust if left unattended. Purge the spark arrestor.

1. Position the vehicle on a level

surface.

2. Place the transmission in PARK.

3. Remove the arrestor

clean-out plug from the
bottom of the muffler.

4. Start the engine.

5. Quickly squeeze and

release the throttle lever
several times to purge car-
bon from the system.

WARNING

Allow components to cool sufficiently before servicing. The exhaust system

can get extremely hot. Never run the engine in an enclosed area or indoors.

Exhaust contains poisonous carbon monoxide gas. Never go under the

vehicle while it's inclined.
Remove any combustible materials from the area. Wear eye protection and

leather work gloves. Do not stand behind or in front of the vehicle while

purging.

Summary of Contents for Sportsman 9921792




































































































































Search results

Summary of Contents for Sportsman 9921792

Reviews:

Related manuals for Sportsman 9921792

Brands by name

Popular brands

Polaris Sportsman 9921792, Owner'S Manual

Search results

Summary of Contents for Sportsman 9921792

Reviews:

Related manuals for Sportsman 9921792

Brands by name

Popular brands