Polaris Sportsman 9921792 Owner'S Manual Download Page 85

Page: 85 / 131

MAINTENANCE

Brake Fluid

Hand Brake

The master cylinder is
located on the left handle-
bar. Maintain the fluid level
6 mm below the top edge of
the master cylinder. Do not
overfill.

1. Position the vehicle on a

level surface. Make sure
the handlebars are straight.

2. View the fluid level

through the indicator win-
dow (eye) on the top of the
master cylinder.

NOTE:

The eye will appear dark

when the fluid level is full.

When fluid is low, the eye

will be clear.

3. Add the recommended

fluid as needed. Do not overfill.

Foot Brake

Check the brake fluid level frequently for the foot brake system. The
reservoir is located under the seat. Maintain the fluid level between the
maximum and minimum marks.

Master

Cylinder

Indicator

Window

Full

Low

Summary of Contents for Sportsman 9921792




































































































































Search results

Summary of Contents for Sportsman 9921792

Reviews:

Related manuals for Sportsman 9921792

Brands by name

Popular brands

Polaris Sportsman 9921792, Owner'S Manual

Search results

Summary of Contents for Sportsman 9921792

Reviews:

Related manuals for Sportsman 9921792

Brands by name

Popular brands