Polaris Sportsman 9921792 Owner'S Manual Download

Page: 119 / 131

117

MAINTENANCE

Transporting the Vehicle

Follow these procedures when transporting the vehicle.

1. Stop the engine.

2. Place the transmission in PARK.

3. Secure the fuel cap, oil cap and

seat.

4. Remove the key to prevent loss during

transporting.

5. Always tie the frame of the Quadricycle to the transporting unit

securely with suitable straps or rope. Do not attach tie straps to the
front A-arm bolt pockets.

Towing a Disabled Vehicle

If towing the vehicle is necessary, shift the transmission into neutral for
better mobility and to prevent damage to the belt.

Always attach the tow rope to the frame of the Quadricycle.

Summary of Contents for Sportsman 9921792




































































































































Search results

Summary of Contents for Sportsman 9921792

Reviews:

Related manuals for Sportsman 9921792

Brands by name

Popular brands

Polaris Sportsman 9921792, Owner'S Manual

Search results

Summary of Contents for Sportsman 9921792

Reviews:

Related manuals for Sportsman 9921792

Brands by name

Popular brands