6.16
9928492 R04 - 2017-2018
RZR
XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
13. Remove the shift shaft rail
j
and shift forks from the
transmission housing as an assembly.
14. Remove the rear output shaft assembly
1 (
by lifting
underneath the gear or by tapping the shaft from the
opposite side.
15. Remove the input shaft
2)
, gear cluster assembly
2!
and
idler
gear
shaft
assembly
2@
from
the
transmission housing by pulling both assemblies
straight up.
16. Place the gear cluster assembly on a clean surface
for inspection. If disassembly is required, refer to
“Gear Cluster Disassembly”.
17. Using a 5 mm Allen wrench, remove the screws that
secure the pinion shaft assembly
2#
. Lift the pinion
shaft assembly straight up to remove it from the
housing. Note the longer screw
2 $
that locks the
snorkel tube.
18. Remove all seals from the gearcase halves and clean
the cases in preparation for assembly.
Gear Cluster Disassembly