Polaris ATV 2002 Page 42 Owner'S Manual Download

Page: 42 / 181

SAFETY

Operator Safety

POTENTIAL HAZARD
Operating this ATV with improper tires, or with improper or

uneven tire pressure.
WHAT CAN HAPPEN
Use of improper tires on this ATV, or operation of this ATV

with improper or uneven tire pressure, may cause loss of

control, and increases the risk of an accident.
HOW TO AVOID THE HAZARD
Always use the size and type tires specified in the Owner’s

Manual Supplement for this vehicle.
Always maintain proper tire pressure as described in the

Owner’s Manual Supplement.

POTENTIAL HAZARD
Operating this ATV with improper modifications.
WHAT CAN HAPPEN
Improper installation of accessories or modification of this

vehicle may cause changes in handling which in some

situations could lead to an accident.
HOW TO AVOID THE HAZARD
Never modify this ATV through improper installation or use of

accessories. All parts and accessories added to this vehicle

should be genuine Polaris Industries Inc. or equivalent

components designed for use on this ATV; and should be

installed and used according to instructions. If you have

questions, consult an authorized Polaris ATV dealer.

WARNING

Summary of Contents for ATV 2002






















































































































































































Search results

Summary of Contents for ATV 2002

Reviews:

Related manuals for ATV 2002

Brands by name

Popular brands

Polaris ATV 2002, Owner'S Manual

Search results

Summary of Contents for ATV 2002

Reviews:

Related manuals for ATV 2002

Brands by name

Popular brands