Polaris ATV 2002 Page 83 Owner'S Manual Download

Page: 83 / 181

RIDING

Safe Riding Tips

Traveling Uphill

Maximum

Whenever traveling uphill always travel straight uphill and:

1. Avoid steep hills (25

maximum).

2. Keep both feet on the footrests.
3. Transfer your weight forward.
4. Proceed at a steady rate of speed and throttle opening.

5. Remain alert and be prepared to take emergency action. This may

include quick dismounting of the ATV.

Indicates a potential hazard that could result in serious injury or

death.

WARNING

Exercise extreme caution when traveling in hilly terrain. Braking

and handling are greatly affected. Loss of vehicle control or

overturning of the ATV could occur causing severe injury or death.

WARNING

Summary of Contents for ATV 2002






















































































































































































Search results

Summary of Contents for ATV 2002

Reviews:

Related manuals for ATV 2002

Brands by name

Popular brands

Polaris ATV 2002, Owner'S Manual

Search results

Summary of Contents for ATV 2002

Reviews:

Related manuals for ATV 2002

Brands by name

Popular brands