Polaris ATV 2002 Page 107 Owner'S Manual Download

Page: 107 / 181

104

MAINTENANCE AND LUBRICATION

Lubrication

Polaris 2-Cycle Lubricants

Polaris has a family of premium oils available for use in all our

products and highly recommends their use. The only oils

recommended for Polaris 2-cycle ATVs are Polaris Premium 2-cycle

oil or Premium Gold Synthetic 2-cycle oil.
Polaris Premium 2-cycle lubricants are the most advanced formulation

of oils specifically designed for today’s 2-cycle engines. Months of lab

and field tests have resulted in a new generation of 2-cycle lubricants.

Polaris Premium 2-cycle lubricants provide additives for 2-cycle

engines lacking in today’s fuel that keep ring grooves cleaner for less

ring sticking and provide improved overall engine cleanliness. With

new generation lubricity technology, they excel in meeting the

lubrication demands of today’s high performance 2-cycle engines.

These are optimum oils recommended for liquid cooled and air cooled

2-cycle engines. We believe these oils are the best available in the

market today.

Premium Gold Synthetic 2-Cycle Oil

Your vehicle has been primed with Premium Gold Synthetic oil. This

lubricant has been specially formulated for low smoke, low odor and

high lubricity. We recommend continued use of this oil or Premium

2-cycle oil.

Premium 2-Cycle Oil

Polaris also has a TC-W3 premium oil available for use in all of our 2

cycle products. We highly recommend its use if premium gold

synthetic is not used. The only oil recommended for this ATV is

Polaris brand oil.
Polaris Premium 2-cycle oils will readily mix with each other, however

do not mix Polaris Premium 2-cycle oils with any other oils as they

may not be compatible and engine damage may occur.

Engine warranty coverage may become void if you use a brand

other than Polaris in your machine.

CAUTION

Summary of Contents for ATV 2002






















































































































































































Search results

Summary of Contents for ATV 2002

Reviews:

Related manuals for ATV 2002

Brands by name

Popular brands

Polaris ATV 2002, Owner'S Manual

Search results

Summary of Contents for ATV 2002

Reviews:

Related manuals for ATV 2002

Brands by name

Popular brands