Polar Electro Xtrainer Plus, User Manual

Page: 15 / 36

22 23
activated in the middle row of the display during the heart rate
measurement in the Heart rate mode by bringing the face of the
Wrist receiver next to the Polar logo of the Transmitter for a
moment.
Choose from the same alternatives as for the Primary Time Display.
However, note that the option which you chose for the Primary Time
Display is not available when setting the Secondary Time Display.
Note also, that if you have not set the timers, you have only one
choice left for the Secondary Time Display. In this case, the only
alternative is set automatically and the Receiver will be back in the
beginning of the Set mode
You have the following three alternatives to continue:
1. To start setting the Timers 1, 2 & 3 press SET/START/STOP.
The first block of the graphic bar representing the setting of
the
Timers 1, 2 & 3 starts to flash.
Continue from Setting the Timers 1, 2 & 3 .
2. To return to Time mode, press SELECT twice.
3. To continue with setting the Cycling mode (Cadence/Altitude
Display, Altitude, Wheelsize and Odometer), press
simultaneously SET/START/STOP and SIGNAL/LIGHT.
SETTING THE CADENCE / ALTITUDE DISPLAY
0 DISP is flashing.
1. Press SIGNAL/LIGHT to select the desired
Cadence/Altitude Display.
Please note that cadence
and altitude cannot be
displayed simultaneously.
CHOOSE FROM THESE ALTERNATIVES:
0 DISP
This is the default setting and does not display
Cadence nor Altitude in Cycling mode.
You should choose this alternative if you don’t
want to use the optional Cadence or Altitude
Sensors.
1 DISP CAD
Displays cadence in Cycling mode.
A separately sold Polar Cadence Sensor
is required.
2 DISP ALT
Displays altitude in Cycling mode. A separately
sold Polar Altitude Sensor is required.
2. Press SET/START/STOP to lock your
selection.
In case of 0 DISP or 1 DISP , WHEEL1
appears in the display.
Continue directly from Calibrating the
wheelsize.
In case of 2 DISP , ALT starts to flash.
Continue directly from Calibrating the altitude.