EVCO S.p.A.
Vcolor 869
| Installer manual ver. 1.0 | Code 144VC869E104
page 50 of 92
Alternatively, the cycle end date can be postponed using the
quick key.
8.9
Slow cooking
Pressing this area enables selection of a slow cooking cycle, which can consist of two phases. This function can only be
enabled if an expansion has been set (see parameter E12).
After selection of the slow cooking function, a screen will appear on which it is possible to view and modify the
relevant set points and to decide whether to set up a temperature or time controlled process. It is not possible to
modify the set points while the cycle is in progress.
The slow cooking pre-settings use the following parameters:
rH10
cabinet set point
rH11
product temperature set point
rH12
cycle duration
rU9
% humidity
