EVCO S.p.A.
Vcolor 869
| Installer manual ver. 1.0 | Code 144VC869E104
page 20 of 92
Details of EVlink Wi-Fi electrical connection
4.3
Precautions for electrical connection
-
Do not use electric or pneumatic screwdrivers on the terminal blocks of the device.
-
If the device has been moved from a cold to a warm place, the humidity may cause condensation to
form inside. Wait about an hour before switching on the power.
-
Make sure that the supply voltage, electrical frequency and power of the device correspond to the local
power supply. See section 17 TECHNICAL SPECIFICATIONS.
-
Disconnect the device from the power supply before doing any type of maintenance.
-
Do not use the device as safety device.
-
For repairs and for further information on the device, contact the EVCO sales network.
