Polar Electro Accurex NV, User Instruction Manual

Page: 8 / 22

4. At point, the first two digits (representing
the hours) are
5 Set the correct hour by moving
up with the
S E L E C T
b u t t o n
or
d o w n w i t h t h e
SIGNAL button.
6 When the correct hour is displayed.
press
the
S T O R E / L A P
button
to lock in your
selectron.
7 The full ten flashes now.
use
the
SELECT
button
to move up, or
the
SIGNAL/LIGHT
button
to move down.
8 When the correct number
IS
d i s p l a y e d ,
press the
S T O R E / L A P
button
to lock
your
9. The one minutes
IS
flashing now Again
use
the
SELECT
button to move up,
or
the
SIGNAL/LIGHT button
to move down.
When the number you want is displayed,
press the STORE/LAP button
to lock in
your selection The two representing
seconds are zeroes
At point the AM/PM indicator will start
flashing again, and the seconds start running
from double zero. You can start over at step 2
to repeat the time setting procedure or move to
the alarm by pressing
t h e S E T /
START/STOP button.
S T E P - B Y - S T E P I N S T R U C T I O N S
F O R S E T T I N G T H E A L A R M .
In the of day display,
press
the SET button twice.
The letters ALM and the alarm
a p p e a r o n
the display, as shown (or
any other previously set
alarm time)
2.
The AM or PM is
flashing now.
3.
At select AM or PM
as you did above, by
the SELECT button
4 Press STORE/LAP to
lock in your
5. At point, the two representing
the hours, are flashing.
6.
Set the correct hour by up
the
SELECT button
or down with
the SIGNAL/
LIGHT button
7
When the correct hour is displayed,
press
the STORE/LAP button to
lock in your
8.
The full ten digit
IS
flashing now.
use
the SELECT button
to move up,
or
the SIGNAL/LIGHT button
to move
down