Polar Air HAHU-200 Page 50 Installation, Operation & Service Manual Download

Page: 50 / 54

PG2021 Global HAHU-VP-ECM-005

Error Code List

Error Description

Code

Reason

Remedy

Room temperature sensor error

Room sensor unplugged or damaged.

1. Check if Tr plug is connected or not.

2. Check if sensor’s resistance is correct or not.

Indoor coil sensor 1 failure

Ti1 sensor unplugged or damaged.

1. Check if Ti1 plug is connected or not.

2. Check if sensor’s resistance is correct or not.

Indoor coil sensor 2 failure

Ti2 sensor unplugged or damaged.

1. Check if Ti2 plug is connected or not.

2. Check if sensor’s resistance is correct or not.

Float switch error

Float switch is opened.

1. Check if the condensate water pipe is connected
or not.

2. Check if the pump is functioning or not.

Indoor coil low temperature protection

Water temperature is lower than 3 ºC. Check the water temperature.

Indoor coil over-heat protection

Water temperature is higher than 70 ºC. Check the water temperature

Filter switch protection

Filter Switch is open.

Replace or clean filter.

Electric Heater failure

Only for unit with EH.

1. Change fan speed to high.

EH safety switch is opened.

2. Replace the damaged EH safety switch.

EC motor failure(CN4)

No EC motor feedback

1. Check Modbus setting.

2. Check the EC motor.

EC motor failure(CN5)

E10

No EC motor feedback

1. Check Modbus setting.

2. Check the EC motor.

Motor qty setting error (S6 PCB)

E11

Motor Qty setting error

1: check Modbus setting

Anti-frozen protection

E12

When unit is standby, Tr<2ºC.

1. Turn on unit to keep Tr high than 5ºC

Indoor coil sensor 3 failure (S6 PCB)

E13

Ti3 sensor unplugged or damaged.

1. Check if Ti3 plug is connected or not.

2. Check if sensor’s resistance is correct or not.

Indoor coil sensor 4 failure (S6 PCB)

E14

Ti4 sensor unplugged or damaged.

1. Check if Ti4 plug is connected or not.

2. Check if sensor’s resistance is correct or not.

PM2.5 sensor failure (S6 PCB)

E15

PM2.5 sensor unplugged or damaged.

1. Check if PM2.5 plug is connected or not.

2. Check if sensor’s resistance is correct or not.

AQI sensor failure (S6 PCB)

E16

AQI sensor unplugged or damaged.

1. Check if AQI plug is connected or not.

2. Check if sensor’s resistance is correct or not.

Wired Wall Pad failure

E17

WWP unplugged or not well

Check plugs

Cooke Industries - Phone: +64 9 579 2185 Email: [email protected] Web: www.cookeindustries.co.nz

Summary of Contents for HAHU-200























































Search results

Summary of Contents for HAHU-200

Reviews:

Related manuals for HAHU-200

Brands by name

Popular brands

Polar Air HAHU-200, Installation, Operation & Service Manual

Search results

Summary of Contents for HAHU-200

Reviews:

Related manuals for HAHU-200

Brands by name

Popular brands