background image

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE

Phone: +33 (0)3 37 49 53 000 - Email: [email protected] - Web: www.pok-fire.com

MOP_PRO_02341_EN_A - 08/07/2021  - Cop

yright© POK S

A

S - Illustr

ations are only informativ

e

MIXY EDUCTOR

 

Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP

6

Warning

5 • Operational instructions

5.1 • General remarks regarding safety during operations

Any  person  under  the  influence  of  drugs,  alcohol  or  under  medication  that  might 

undermine his reflexes is not authorized to use the eductor.

Please observe all local, national and international instructions regarding property 

and persons safety, accident prevention and environmental compliance.

Any non-compliance with these instructions and the one in this manual may lead to 

serious injuries.

Complete the manual with the rules in place where the eductor is used (personal protective 

equipment, operation sequence, storage of the remote control, etc.).

6 • Warranty

• Without prejudice to the legal guarantee that applies in any case, POK grants a warranty of 2 years from 

the shipping date on its material (eductor, accessories) apart from wearing parts and batteries, against 

faulty design, construction and machining and against all abnormal wear on condition of having observed 

the use and maintenance instructions in this manual. 

• Any attempt to troubleshoot, modify any components or parts, as well as any use of parts that are not 

original and/or expressly approved by POK, by a non-authorized dealer, and without written permission, 

results in the loss of the POK guarantee for all parts. 

• POK's warranty excludes all damages resulting from: 

- improper use or non-compliance with the instructions, 

- an error while operating the material, 

- negligence, 

- lack of maintenance, 

- improper handling, 

- improper storage, 

- a use in polluted areas (chemical or electrochemical agents, hazardous fumes, etc.). 

• Only a specialized staff, qualified and trained by POK is allowed to do maintenance and repair POK products. 

• POK cannot be held liable for direct or indirect consequences suffered by the client, due to a failure of 

its material. POK's liability is strictly limited to its material and will not lead to a compensation to cover 

damages and interest. 

• Repair or modification of POK material while under warranty does not extend the warranty period. 

• Cost of packing, transport and insurance when sending POK material back to our premises while under 

warranty is the responsibility of the client. 

• POK warranty includes the repair (spare parts and labour) or replacement of parts recognised as faulty 

after technical assessment. The place of performance of the warranty is POK's plant in Nogent-sur-Seine 

(10). 

• In the event of dispute regarding the supply or the payment of material, only the commercial court of 

TROYES is competent, even in the event of appeal or multiple defendants.

Summary of Contents for MIXY Eductor





















Reviews: