Boeckeler Instruments, Inc.
Pointmaker PVI-65 HD/SD-SDI Broadcast Video Marker -
Page 57
Section Four: Comm Port Devices Menu
Comm Port Operations
PVI-to-PVI:
Use this selection if the PVI-65 is being used to connect
to another Pointmaker system.
1.
Select the appropriate device type in the Device Select dialog for the
port where you are connecting the other system
(See “Designating a
Device Type” on page 54)
.
Where a question mark is usually found, you will instead see an
arrow
.
NOTE: If the device type you desire for connecting to other systems
is unavailable, check to see if it is assigned to another port. Remem-
ber, only one use of each is allowed.
2.
Activate the arrow next to the device type to set its communication
parameters.
Figure 4-3: Control Port Dialog
The corresponding dialog appears.
Select the desired baud rate, parity, and stop bits.
NOTE: Factory settings are 9600 baud, no parity, 1 stop bit. Data bits,
which cannot be manually set, are 8 data bits.
3.
Exit the menu system and recycle the power on the PVI-65.
The PVI-65 implements the new settings.
Control Port PORT #2
BAUD RATE
PARITY
STOP
BITS
9600
4800
2400
1200
600
300
110
NONE
EVEN
ODD
SPACE
MARK
1
2
Summary of Contents for PVI-65
