Pointmaker PVI-65, User Manual, Page: 61 / 130

Boeckeler Instruments, Inc.
Pointmaker PVI-65 HD/SD-SDI Broadcast Video Marker - Page 51
Section Four: Comm Port Devices Menu Comm Port Operations
Figure 4-3: Calibrate Touch Screen dialog
The appropriate calibration screen appears.
5. Follow the calibration instructions displayed.
After users perform final calibration procedures, the Calibration Pro-
cedure display will automatically disappear, and users will be
returned to the menu system.
6. Exit the menu system.
Prioritizing Controller/Marker Usage
If desired, you can prioritize who’s controller/marker has precedence when
more than one is installed.
Three different modes are available:
OPEN mode: Allows all installed controllers to draw and point at
any time. All users may change the appearance of markers, including
clearing markers. However, while one user is drawing, no other user
can mark or change the appearance of markers.
S ELECTIVE mode: Adds slightly more organization, requiring a
user to first select CONTROL on the tablet or touch screen before
they begin marking. Again, while one user is drawing, no other user
can mark or change the appearance of markers. This option only
works with digitizing tablets and touch screens. Other controllers
continue to work in the OPEN mode.
PRIORITY USER mode: This mode allows one pre-assigned user
to take and release control of marking functions. On first use, the Pri-
ority User assigned in this menu is in control. While in control, a
small “zap” character icon will appear in the lower-right corner of the
CALIBRATE TOUCH SCREEN
TOUCH UPPER LEFT TARGET