- 8 -
1401_GB-ABSTELLEN_293
GB
PARKING THE IMPLEMENT
The implement can be parked in either the working
position or transport position.
- Place the implement aside in secure
position!
- Secure the implement against rolling
away, use wheel chocks!
1
2
- Swerve the support foot:
- Unlock the support foot in transport position with the
bolt (2)
- Swivel down the support foot
- Secure support foot with the bolt (2)
- Crank the support foot with winder (1) until it reaches
the secure position
- Pull cardan shaft off and lay on cardan shaft holder.
Important!
Ensure stability
when parked!
Do not use the safety chain to rest the cardan shaft!
- Close shut-off valve (pos. A) and then disconnect
hydraulic lines from tractor for every plug connection.
Should problems occur when uncoupling:
- Position servo (ST) briefly on "Lower" (s).
A
E
TD 26/92/16
s
h
0
ST
Doing this will reduce any possible residual pressure
present on the plug connection, then the hydraulic line
can be uncoupled easily.
Parking the implement
Shorten the entire length
- Shorten entire length (80 cm) by swivelling the front
rotor unit in.
