Page 28 of 48
h
(Halt Continuous Sampling, Enter Standby)
Description
Exits Continuous Sampling Mode (
go
) and enters Standby mode (
h
). If this command is
received while the TCM2.5/2.6 is transmitting an output word, the remainder of the output
word will be sent before the TCM2.5/2.6 changes modes.
Syntax
h<cr>
Output
:[Ennn]<cr><lf>
Related Commands
go (Enter Continuous Sampling Mode)
halt= (Enable Single Character Halt)
halt=
(Enable Single Character Halt)
Description
The
halt
command during
go
mode has optionally been made a single character command
using the
halt=e
command.
Syntax
halt=d<cr>
Output
:[Ennn]<cr><lf>
Valid Values
Input
Description
e
Enable, h command for halting the ouput
d
h <cr> command for halting the output (default setting)
Table 7: Valid
halt=
Values
Query Response
halt?
:halt=
Related Commands
go (Enter Continuous Sampling Mode)
