Installation, Operation and Maintenance Manual
Page ii
Medical Vacuum Plant
Issue Record
Issue No.
Reason for Change
Pages affected
Date
00
First issue
All
2015
Introduction
This manual contains information needed to install, operate and maintain the Pneumatech Medical
Gas Solutions (Pneumatech MGS) vacuum plant.
The contents of this manual are intended to be read and used by suitably qualified personnel.
AC input power connection
Electrical supply requirements vary with different pump models.
Incoming wiring must include neutral and earth.
WARNINGS, CAUTIONS and NOTES
The following Warnings, Cautions, and Notes must be read and understood before using the Vacuum
Plant.
Warnings!
Warnings tell you about dangerous conditions that could lead to death or serious injury to the user
that can occur if you do not obey all of the instructions in this manual.
WARNING!
Read through this entire instruction manual before using or showing others how
to use this equipment. As with all medical equipment, attempting to use this device without a
thorough understanding of its operation may result in patient or user injury.
WARNING!
Wear protective gloves when handling oily components.
WARNING!
The interlock isolator on the Pump Starter Panel must be isolated (switched off)
and locked in the off position before accessing pump electrical compartments or mechanical
drives.
WARNING!
Wear protective gloves when handling vacuum pump internal components.
Components upstream of and including the aftercooler may reach temperatures of over 100°C
during operation.
WARNING!
Do not attempt to modify this device in any way not strictly described within this
manual.
WARNING!
Medical vacuum plant must be protected from access by unauthorised
personnel.
WARNING!
Ear defenders (hearing protection) maybe needed, especially during
maintenance if acoustic enclosures are removed.
WARNING!
The surfaces of the pumps and components connected to them reach high
temperatures when operating for long periods.
WARNING!
Pump starter panels are supplied with dangerous voltages. The mains supply
must be isolated (switched off) and locked in the off position before attempting to access live
components in the pump starter panel.
WARNING!
Wear protective gloves when handling oily components.
Summary of Contents for HTM02-01
