Pneumatech HTM02-01, Operation And Maintenance Manual

Page: 36 / 93

Installation, Operation and Maintenance Manual
Page 34 Medical Vacuum Plant
8.3 Central controller (PureLogic®)
8.3.1
Interface, icons and menu structure
Figure 8-13; PureLogic® Central Controller
Table 8-6; PureLogic® Central Controller
Item Designation Function
1 Display Shows icons and operating conditioning.
2 Warning LED Is lit when warning is triggered.
3 Service LED Is lit when a service is needed.
4 Operation LED Is lit when pump is automatically started and stopped.
5 Voltage LED Indicates the voltage is turned on.
6 Enter button Confirm action.
7 Escape button Go to the previous screen or end current action.
8 Stop buttons This button stops the pump when in Local mode.
9 Start button This button puts the pump in automatic operation when in Local mode.
The operation LED (4) lights up and the pump controller is operative.
10 Cubicle lock Can be opened with a key to open the cubicle.
11 Scroll buttons Use these buttons to scroll through the menu.
12 Purelogic®
Graphic Controller Intelligent central controller which sequences pumps and controls the
vacuum plant system.