TECHNICAL SUPPORT: [email protected] | (760) 727-0300
PG. 15
THIS DOCUMENT IS PROPRIETARY AND CONFIDENTIAL. © 2021 PRECISION MEASUREMENT ENGINEERING, INC. ALL RIGHTS RESERVED.
CHAPTER 2: SOFTWARE
2.1 Overview and Software Installation
The miniDOT Clear Logger arrives with these files on the SD card:
•
miniDOTControl.jar program allows you to see the state of the miniDOT Clear Logger as well
as set the recording interval.
•
miniDOTPlot.jar program allows you to see the plots of the recorded measurements.
•
miniDOTConcatenate.jar program gathers all the daily files into one CAT.txt file.
•
Manual.pdf is the manual.
These files are located on the root directory of the miniDOT Clear Logger.
PME suggests you leave these programs where they are on the miniDOT Clear Logger, but you may
copy them to any
folder on your HOST computer’s hard drive.
miniDOT Control, miniDOT Plot, and miniDOT Concatenate programs are Java language programs
that require the HOST computer to have the Java Runtime Engine V1.7 (JRE) or later versions
installed. This engine is commonly required for Internet applications and will likely already be
installed on the HOST computer. You can test this by running the miniDOT Plot program. If this
program displays its graphical user interface, then the JRE is installed. If not, then the JRE can be
downloaded via the Internet from
At this time, the miniDOT Clear Logger is supported on the Windows operating systems but may
also operate on Macintosh and perhaps Linux.
