TECHNICAL SUPPORT: [email protected] | (760) 727-0300
PG. 15
THIS DOCUMENT IS PROPRIETARY AND CONFIDENTIAL. © 2021 PRECISION MEASUREMENT ENGINEERING, INC. ALL RIGHTS RESERVED.
S T O R A G E W H E N N O T I N U S E
Remove the batteries. Keep the black end covered with the cap supplied by PME. If the cap is lost,
then cover the black end cap with aluminum foil. There may be a calibration effect of ambient
lighting so attempt to keep ambient light from reaching the sensing foil as much as possible.
J A V A
miniWIPER programs depend on Java and require Java 1.7 or higher. Update Java at
https://java.com/en/download/index.jsp
Upload Files to an Android device
–
It is possible to transfer your measurement files from the miniWIPER to your Android device. This
operation has 3 prerequisites.
1. An Android device equipped with USB On-The-Go (OTG) feature. OTG is a feature for
most
modern Android devices that allow them to act as a USB host.
OTG was introduced with Android version 3.1 and should be a useable feature for most
devices. It is still possible that your device does not support OTG. Please test your device
with a miniWIPER prior to attempting to upload while in the field.
2. A USB OTG cable. This is essentially an adapter with a micro USB connector on one end
that connects to your Android device and a standard A type USB plug on the other. The
cable supplied with the miniWIPER connects to this end.
3. A "File Explorer" app should be downloaded on your Android device. These types of apps
assist with being able to view and move files from device to device. "ES File Explorer" is a
free app available on the Google app store and is recommended for use with the
miniWIPER.
If these 3 requirements are met, then connect the miniWIPER to your Android device. You should
see the miniWIPER’s green connection light come on and your Android device will display a
message about "preparing USB storage". When "USB storage ready" is shown, then use your "file
explorer" program to move your data from the miniWIPER onto your Android device.
Again, it is highly recommended that you try this operation at your workstation prior to depending
upon this in the field.
Currently the associated miniWIPER programs miniWIPERPlot and miniWIPERConcatenate are not
supported by the Android devices. Please
E N V I R O N M E N T A L U S E A N D S T O R A G E C O N D I T I O N S
miniWIPER is over the range of 0 to 35 deg C temperature and may be continuously immersed in
fresh or salt water to a maximum depth of 25 meters. miniWIPER may be stored in environments
ranging from 0 to 100% humidity and temperatures ranging from -20 deg C to +40 deg C.
