TECHNICAL SUPPORT: [email protected] | (760) 727-0300
PG. 6
THIS DOCUMENT IS PROPRIETARY AND CONFIDENTIAL. © 2021 PRECISION MEASUREMENT ENGINEERING, INC. ALL RIGHTS RESERVED.
CHAPTER 1: INSTALLATION
1.1 Overview
Your miniWIPER will provide a gentle brush action
across the Cyclops 7 optical surface, which is
intended to reduce or eliminate fouling organisms.
This wiper is an accessory for the Cyclops 7 that
can be added at any time.
The wiper will wipe at intervals between 1 hour and
24 hours. At time of shipment the wiper is set to
wipe every 6 hours. Wipe interval can be selected
by the customer with intervals as short as 1 hour or
as long as 24 hours. (Wipe intervals outside this
range are available. Please contact PME.)
miniWIPER connects to a Windows HOSTcomputer
via USB and appears as a Local Disk. This local disk contains software to select wipe intervals and
perform other tasks. miniWIPER records various parameters each time it performs a wipe. These
appear as files on this local disk.
The miniWIPER for Cyclops 7
product consists of the wiper
motor, USB communication cable
(sold separately), wiper sensor
guard, and bracket (sold
separately), shown in the picture
to the right. The Cyclops 7 shown
is supplied by the customer.
