0000104046/010822/A MDB-Compact PRO
5
PREFACE
Using this manual
This manual is intended to be used as a work of reference for
professional, well trained and authorised users to be able to
safely install, use, maintain and repair the product mentioned
on the cover of this document.
Pictograms and symbols
The following pictograms and symbols are used in this manual:
TIP
Suggestions and recommendations to simplify
carrying out tasks and actions.
ATTENTION
A remark with additional information for the user. A
remark brings possible problems to the user’s
attention.
CAUTION!
Procedures, if not carried out with the necessary
caution, could damage the product, the workshop or
the environment.
WARNING!
Procedures which, if not carried out with the
necessary caution, may damage the product or
cause serious personal injury.
CAUTION!
Denotes risk of electric shock.
WARNING!
Fire hazard! Important warning to prevent fire.
WARNING!
Explosion hazard! Important warning to prevent
explosions.
Personal protective equipment (PPE)
Instruction to use respiratory protection when you
do service, maintenance and repair jobs, as well as
during functional testing. We recommend to use a
half-face respirator according to EN 149:2001 +
A1:2009, classe FFP3 (Directive 89/686/EEC).
Personal protective equipment (PPE)
Instruction to use protective gloves when you do
service, maintenance and repair jobs.
Text indicators
Listings indicated by “-” (hyphen) concern enumerations.
Listings indicated by “•” (bullet point) describe steps to
perform.
Service and technical support
For information about specific adjustments, maintenance or
repair jobs which are not dealt with in this manual, please
contact the supplier of the product. He will always be willing to
help you. Make sure you have the following specifications at
hand:
-
product name
-
serial number
You can find these data on the identification plate.
Product indications
Product type
Equals to:
MDB-2/Compact PRO
MDB-2/C
MDB-4/Compact PRO
MDB-4/C
MDB-6/Compact PRO
MDB-6/C
The specific product type (4/6/8) corresponds with the number of
filter cartridges
1
INTRODUCTION
1.1
Identification of the product
The identification plate contains, among other
things, the following data:
-
product name
-
serial number
-
supply voltage and frequency
-
power consumption
1.2
General description
The MDB-Compact PRO is a filter unit with integrated fan, filter
cleaning system and dust drawer for connection to an external
device, e.g. a welding robot or a cutting table. The fan is
placed in a sound absorbing box; to enhance noise reduction
the fan exhaust faces down.
Filter cartridges are not included and must be selected and
ordered separately.
1.2.1 Control equipment
The unit is controlled by ControlPro control equipment.
ControlPro is an intelligent control panel with separate HMI
with extensive feature package for fan/filter control; remote
access via network.
For more information, refer to the product data sheet and
separate installation manual that is supplied with the
ControlPro.
1.3
Product combinations
To operate the unit, selection of filter cartridges is
required. The following types are available:
Filter cartridge:
Type
Surface
Material
CART-D:
Premium Plus
15 m² (161 ft²)
BiCo spunbond polyester
Premium
15 m² (161 ft²)
spunbond polyester
Economy
15 m² (161 ft²)
cellulose
CART-C
15 m² (161 ft²)
BiCo spunbond polyester,
antistatic
CART-E
15 m² (161 ft²)
BiCo spunbond pol
PTFE impregnation
CART-PTFE/10
10 m² (108 ft²)
BiCo spunbond pol
PTFE membrane
CART-PTFE/15
15 m² (161 ft²)
CART-MB
10,7 m² (115 ft²) cellulose with polypropylene
microfiber overlay,
electrostatically charged
The specific product type
1
corresponds with the required
number of filter cartridges.
1.3.1 Precoat
To enhance the efficiency and lifespan of the filter cartridges, it
is strongly recommended to add precoat material (PRECO-N).
This applies to polyester filter cartridges type CART-D, CART-C
and CART-E only.
Dosing per filter cartridge: 500 g (1⅛ lbs.).
1. MDB-
2
/C, MDB-
4
/C and MDB-
6
/C
