Legion Solar Installation and Operations Manual
Important Safety Information
Read this First
This document contains instructions for use during installation and maintenance of Legion Solar System.
To reduce the risk of electrical shock, and to ensure the safe installation and operation of Legion Solar
System, pay close attention to following safety symbols that appear throughout this document.
DANGER! A hazardous condition, if not avoided, will result in death, serious injury, equipment or
property damage.
WARNING! A hazardous condition, if not avoided, could result in death, serious injury,
equipment or property damage.
WARNING! An electrical condition, if not avoided, could result in death, serious injury,
fi
re,
equipment or property damage. Use extreme caution and follow instructions carefully.
Safety Instructions
• Before installing or using Legion Solar System, read all instructions and cautionary markings in this
document.
• Do not use Legion Solar equipment in a manner not speci
fi
ed by the manufacturer. Doing so may
cause death or injury to persons, or damage to equipment and/or property.
• Only quali
fi
ed personnel should install or replace Legion Solar components and accessories.
• Perform all electrical installations in accordance with all applicable electrical and local jurisdiction
codes.
• The DC conductors of this photovoltaic system are ungrounded and may be energized.
• Do not attempt to repair the MicroInverter, Battery Commander, O
ff
Grid Controller, O
ff
Grid Inverter
and/or any Legion Solar components/accessories. They contain no user serviceable parts. If it fails
contact PLX Devices customer service to obtain an RMA (return merchandise authorization).
Tampering with Legion Solar components will void the warranty.
• If the AC cable and/or connectors are broken or damaged, do not install the unit.
• Wear gloves when handling the PV panels to avoid injury, as some edges may be sharp.
• The MicroInverter may get hot during operation can and reach temperatures above 80°C (176° F). To
reduce the risk of burns, use caution when working with MicroInverters.
• Do NOT disconnect the photovoltaic modules from the MicroInverter without
fi
rst disconnecting the
AC power.
Copyright © 2021 PLX Devices Inc.
4
