Plus N-20S, User Manual

Page: 42 / 50

E-42
Notice
Resetting the Network Settings
Operate the buttons on the copyboard to reset the network settings to their defaults.
Setting items that are reset: Admin User name, Admin Password, User Name, Password, IP Address, Subnet Mask, Default Gate
-
way, Folder for saving, FTP User Name, FTP Password, FTP Server IP Address, FTP Server Port, FTP
Save Directory Name
• Once reset, the network settings cannot be restored.
1.
While pressing the Power button, press the Network but-
ton.
The copyboard switches to the network settings reset mode and “00” flashes on the
display window.
2.
Press the Color Print (Increase) or B/W Print (Decrease)
button to display the network reset number.
• The network reset number can be viewed when User Setting is selected with
administrator authority.
The display switches as follows each time the Color Print (Increase) button is pressed:
01
→
02
→
……
→
99
→
00
→
01
The display switches as follows each time the Color Print (Decrease) button is
pressed: 99
→
98
→
……
→
01
→
00
→
99
3.
Press the Save button to enter.
To cancel, press the Power button.
When the reset number matches, “LA” flashes for 5 seconds on the display window,
then the copyboard’s network settings are overwritten with the default values and the
copyboard automatically reboots.
If “LE” flashes for 5 seconds then stops flashing, remaining lit, the reset number is
wrong.
• Press the Power button to cancel, then start over from step 1.
CB Setup and Network Setting Procedure