Plus N-20S, User Manual

Page: 10 / 50

E-10
Wall outlet
Copyboard’s AC power
adapter
Printer’s AC power
adapter
AC adaptor box
About the connection and the AC adapter box
Place the AC power adapters of the main unit and printer in the AC adapter box.
If you only have one power outlet, connect the AC power adapters of the main unit and printer to a commer -
cially available cable tap, place them in the AC adapter box, and connect the cable tap’s power plug to the wall
power outlet.
Also, if not connected or placed in the AC adapter box, see the separate “Assembly and Setup Manual” and
connect according to the purpose.
Note
* Be sure to insert all the plugs securely.
To use the copyboard, connect the copyboard’s AC power plug to a wall power outlet.
The main power turns on. In this manual, this is referred to as the “standby mode”.
The descriptions in this manual assume that the AC power plug is connected (that the unit is in the standby mode).
About the printer’s power supply
• When using a printer, connect its power plug to a wall power outlet.
Also, turn on the printer’s power before printing.
When not using the copyboard for long periods of time
Disconnect the AC power adapter’s power plug from the AC power outlet in the wall.
• When the AC power adapter’s power plug is unplugged from the power outlet, place the copyboard near the power outlet
so that it can be reached easily.
• The supplied AC power adapter and AC power cord are intended for exclusive use with this product. Never use them with
another product.
Notice
Connecting the Power