Plus N-20S, User Manual

Page: 13 / 50

E-13
Notice
Notice
Set the paper.
Please use A4 or letter size printer paper.
• When using letter size paper, set letter size paper in
the device settings. (See page E-29, E-36.)
1) Arrange the paper edges so that they are even.
2) Insert paper at the specified position of the paper
tray.
3) Press the paper guide gently until it touches the
paper.
See your printer’s operating instructions for a
description of the paper that can be used.
Switch on the power.
Press the power switch. The power indicator lights.
This completes the preparation of the printer.
Press the Color Print or the B/W Print button on the copyboard’s
control panel. One page worth of data is read and the printing operation
starts.
• Depending on the printer’s specifications, some time may be
required for cleaning of the print head.
• Depending on the printer, indicators, etc., may flash after the
power is turned until the printer is prepared to print. In this case,
see the printer’s operating instructions and check that the printer
is ready before starting the printing operation on the copyboard.
When finished printing...
Switch off the printer power and remove the paper.
Close the paper tray.
• Caution: Do not turn off the power or disconnect the USB cable
during printing.
Discharge tray
Paper guide
Use a printer to print out the image that has been drawn on the sheet surface. Use a PLUS-designated printer.
Operations and names of parts differ from printer to printer. For details of operations, see your printer’s operat-
ing instructions.
Preparing the Printer
Please check that the copyboard and the printer have been connected. See Page E-49.
Paper
Power switch
Appearance of printer is for illustration
purposes.
Note
Note
Paper tray
Printing (printer sold separately)