Plus N-20S, User Manual

Page: 30 / 50

E-30
CB Setup and Network Setting Procedure
Function
Number
Setting Item Description Setting Status Indicators
Erase Reminder
Setting of whether or not to notify the user that char -
acters or diagrams drawn on the back side of the
copyboard’s sheet surface have not been erased.
This is effective for confidential meetings, etc.
Disable: The Erase Reminder function does not work.
(Setting upon factory shipment)
Enable: When the Power button is pressed to turn
the power off, the display window on the
copyboard’s operation panel flashes and the
copyboard automatically moves to the non-
erased surface, after which the power turns
off.
• The Erase Reminder function may not work prop -
erly due to dirt on the sheet adhesive or marker
traces.
Disable* USB
(Lit) Printer
(Off)
Enable USB
(Off) Printer
(Lit)
Time Day Stamp
Format
Selection of the format in which the date and time are
displayed.
Examples of displays:
YYYY/M/D
2011/1/23 01:23
DD-MMM-YYYY 23-Jan-2011 01:23
MMM-DD-YYYY Jan-23-2011 01:23
YYYY/M/D* USB
(Lit) Printer
(Off)
DD-MMM-
YYYY USB
(Off) Printer
(Lit)
MMM-DD-
YYYY USB
(Lit) Printer
(Lit)
Reset Device Set -
tings
This restores the copyboard device settings at F2 to
F9 to their defaults (settings upon factory shipment).
The settings marked “ * ” are the defaults.
(1) Select FA, then press the Save button. “FA.”
is displayed (with the dot lit).
(2) Press the Save button again. The settings are
reset.
— — —