Automist Smartscan
®
Handbook v1.2.3
Plumis Ltd Copyright © 2017. All Rights Reserved.
Page 9 of 64
S MA RT SC AN
®
EN 60335-1:2002
Household and similar electrical appliances
–
Safety:
Smartscan
System Clarifications
•
The Smartscan system is a Class I appliance, meaning the system provides additional
electric shock protection in the form of a fully earthed pump enclosure
•
The system therefore uses protective impedance because of the earthed enclosure
•
The Automist pump unit is a stationary device
•
The Smartscan head is a fixed appliance
•
The Automist pump unit
uses a type Y power supply cord
–
if the cord is damaged, it can only be
replaced by Plumis (the manufacturer) to avoid a hazard
Quality Assurance
Concept
•
Independently tested by Exova Warringtonfire and demonstrated to meet the fire performance
standards of BS 8458:2015 and BS 9252:2011, the most up to date residential water mist and
sprinkler, respectively. Smartscan has a (BSi Verification Certificate - VC 656504).
•
Developed in collaboration with the University of Greenwich Fire Safety Group, carrying our
analysis and computer fluid models of spray patterns and fire behaviour.
•
CE marked
–
Tested to meet EU consumer safety, health & environmental requirements
•
When correctly installed, the Automist Smartscan fire suppression system, complies with the
requirements of the United Kingdom Water Byelaws.
Company
•
Third Party Certification by BRE Global have established Plumis Limited have complied with the
Quality Management Systems requirements of ISO 9001:2008 for the design, manufacture and
supply of water mist fire suppression systems.
