PLP POWER MAX Dual Tilt Array, Installation Manual

Page: 8 / 16

Use four Protection Pads per Tray Assembly, placing
one Pad under each of the four Tray legs as shown.
Insert the Backing Plate through the Back Bracket
and the Deflector, thread on 5/16” Flange Nuts.
Adjust the Deflector from side-to-side as needed
then tighten the Flange Nuts. Torque to 15 ft.-lbs.
Insert the Backing Plate through the Back Bracket and
the overlapping Deflectors. Thread on 5/16” Flange
Nuts. Adjust the Deflectors from side-to-side as needed
then tighten the Flange Nuts. Torque to 15 ft.-lbs.
POWER MAX™ Accessories Installation Guide, Tilted (5°, 10°), Dual Tilt and Flush Arrays
Installing Roof Protection Pads - All Systems
Installing Deflectors - Tilted (10°) Array Only
6