POWER MAX™ Accessories Installation Guide, Tilted (5°, 10°), Dual Tilt and Flush Arrays
Installing Seismic Attachments - All Systems
Without exception,
Seismic Attach-
ments must be
installed/applied
per the job specific
project drawings.
Be absolutely
certain that the
roof anchors are
installed/secured
to the roof surface
per the manufactur-
er’s specifications.
Failure to do so
could lead to a cat-
astrophic structural
failure and severe
personal injury or
death. Further-
more, failure to
meet specifications
voids the system
warranty.
CAUTION
These instructions
do not include
the installation of
the attachment
to the roof top
surface. Refer to
the attachment
manufacturer for
product specific
installation
instructions.
NOTE
Pass the Unistrut under the Ballast Trays and position
N-S to accommodate roof attachment locations.
As needed, Splice Unistrut sections together.
Torque to 20 ft.-lbs.
Secure the Unistrut to the Ballast Trays (it’s only
necessary to secure the north end of each Ballast Tray)
Torque to 20 ft.-lbs.
Install/secure the Roof Anchor to the rooftop. Secure
the Unistrut to the Roof Anchor with the Seismic
Attachment and hardware.
Torque to 20 ft.-lbs.
Item
Description
Qty
Supplied By
1
3/8-1” Hex Bolt & Lockwasher - Stainless Steel
4
Customer
2
Splice, Unistrut p/n P4377 or Equivalent
N/A
Customer
3
Channel Nut, Unistrut p/n P3008 or Equivalent
4
Customer
4
Rail, Unistrut p/n P3300 or Equivalent
N/A
Customer
5
3/8 x 1-1/4” Hex Bolt & Lockwasher - Stainless Steel
N/A
Customer
6
Square Washer, Unistrut p/n P1063 or Equivalent
N/A
Customer
7
Attachment Plate (Anchor Attachment Kit)
1
PLP
8
3/8-16 x 1” Hex Bolt (Anchor Attachment Kit)
4
PLP
9
3/8 Lock Washer (Anchor Attachment Kit)
4
PLP
10
Summary of Contents for POWER MAX Dual Tilt Array
Page 1: ...POWER MAXTM Accessories Tilted 5 10 Dual Tilt Flush Arrays Installation Guide SP3470 1 ...
Page 13: ...11 ...
Page 14: ...12 ...
Page 15: ...13 ...
